Graphic Design Courses Akershus

Graphic Design Courses Akershus

Any of you who follow this blog are likely to have any or a lot of graphics and web design familiarity. What, though, is printing? You would want to print everything that you have developed utilising your Illustrator and Photoshop skills at some stage or another. Blue Sky Graphics’ graphic design course would familiarise you with this software and more!

It might be hard to get right whether it is a poster you have been paying to create or you may want to print your own business cards. Let us hope that this article will help you and take you to perfect printing.

Several printer types are available: laser jet, bubble jet, thermal printers, inkjet, etc. Printing inkjet is certainly something that you are able to get around and use the most. Inkjet printers allow use of liquid ink to create the photographs you generate. The discrepancy between the two is that ink cartridges have built-in print heads, whereas ink tanks are just a tube. Typically, inkjet printers have only ink cartridges or ink tanks.

Graphic design course would familiarise you with this software and more
Graphic design course would familiarise you with this software and more

We aspire to offer you the basic abilities that you need to learn graphic design. You need to update your knowledge of this vast environment to meet the needs of the market, regardless of whether you are a newbie or a worker in this field. For this cause, Blue Sky Graphics is known as the best medium.

Learn about proper colour usage at BSG

How colours behave when writing is one of the most important things to remember. You will usually use four cartridges for your regular inkjet printer: one black, one cyan, one magenta and one peach, CMYK. The printer will use a combination of cyan, magenta, yellow or black to generate almost any colour you want, utilising the CMYK colour model. White is not necessary and simulates a lack of colour markers in a way, exposing the white paper behind it, producing either a white or a light shade.

It would be prudent to make sure that you either prepare or migrate to CMYK before printing while modelling for printing, as colours look different than when using RGB, but we will talk more about that later.

Stripes The

Resolution and DPI are a more important factor. What kind of resolution you actually design and print depends on how high-quality you want the image to be and what kind of disadvantages your printer has. Owing to the exclusive use of just four printer colour cartridges, the DPI must be considerably greater than the computer file, so that it is possible to repeat the more difficult colours. The average DPI (dots per inch) for a magazine or leaflet will usually be 300 while posing for print, for instance, but the greater the quality, the better the illustration looks.

Printing strategy

Print-specific architecture is not the same as web-based and digital architecture, so it can be a little complicated in fact.

Traditionally, as mentioned previously, you may use CMYK when modelling for printing, and this is still the case when using high-end printers. The troublesome issue is that many modern inkjet printers do not actually accept CMYK data, so the printer may convert any data submitted to RGB colour mode even though you upload a file for printing from Photoshop using CMYK colour mode. But it is hard for me to tell you what type you are going to be using, because for any printer you use, it is going to be different.


Personally, I will suggest going with RGB in the first stage of the template when starting a new document for printing. The reasons for this are: lower RGB file sizes, some filters and effects do not function because CMYK and RGB have a larger colour range. Then, if your printer specifies that CMYK data can be collected, the only downside to this being a slight colour loss / adjustment that you will be able to correct, once you are ready to print, switch to CMYK.

It is pretty quick now when it comes to adjusting the DPI. When designing for printing, 300 DPI will almost always be as high as you should be. The human eye will not distinguish between dots from a regular reading point at this scale, so it would usually be futile to achieve a better resolution.

The resolution would be lower if you print something that is not seen close up, such as a poster or banner, normally between 150-200 DPI is all correct. It is common for the resolution to be as poor as 12-15 DPI when constructing something much larger that can be seen from a distance, such as a huge billboard.

You definitely will not print it yourself with any of the larger prints, but it is always safe to question what kind of resolution and colour mode the printer needs.